情報·詳しくは

The high flow filtration system is becoming more and more popular for many industries which require large capacity. One of the flagship products from Brother Filtration is Max Flow FRP Housing. As a new trend and advanced product, it is suitable for various applications.

How to install Max Flow FRP Housing

Using an FRP skid, which is comprised of FRP housings, can effectively enlarge all benefits of single housing and handle larger water capacity. It is suitable for high-flow applications such as seawater desalination, especially for the condition that metal materials can not be used.

With the FRP high flow housing system as pre-filtration for RO system, expensive RO membrane and high-pressure feed pumps will be perfectly protected from the impacts of severe particles.

using a FRP skid, which is comprised of FRP housings

You may connect this effective FRP Housing with a complex and complicated structure, and think that it would be difficult for workers to install and operate.

However, the fact is that Brother Filtration FRP Housing is easy for everyone to install with only several simple steps. We will show you how to install an FRP Housing in the following part.

Steps of installation for FRP housing

Compared to traditional stainless steel systems, FRP housing and FRP system are much easier to operate. The proper design and perfect structure will bring you minimum downtime and less maintenance cost.

Before the installation, we should know some basics about FRP Housing. We need to know all spare parts and their locations first. Below is the picture of the spare parts you need, please carefully observe them.

Cartridge housing Accessories
spare parts2

Then, we move on to installation. Let’s see how to install the housing step by step.

Firstly, we put the cartridge filter into the inlet end cap, make sure it is stuck tightly. And we insert it into the FRP housing.

how to install the housing step by step

Secondly, we fix the inlet end cap with locking kit. We need to place the locking kit into the groove.

Secondly, we fix the inlet end cap with locking kit. We need to place the locking kit into the groove.

Thirdly, we put thrust ring onto the bottom of the cartridge filter on the other side

Thirdly, we put thrust ring onto the bottom of the cartridge filter on the other side

Then, we insert the handle side end cap and fix it with locking kit placed into the groove.

Then, we insert the handle side end cap and fix it with locking kit placed into the groove.

Finally, we connect pipes with below presented finished two ends.

Finally, we connect pipes with below presented finished two ends.

That’s all accomplished, is it easy and simple? You don’t need to be surprised by this convenient installation and operation. A good design always has such an effect.

Benefits of FRP housing

high flow FRP skid

Brother Filtration is confident to recommend this FRP housing to you for various applications and industries. All its advantages we have already mentioned above, but we want to make it more clear and visualized for you to understand its outstanding benefits of it.

  • 30%-50% lower equipment cost than stainless steel
  • Larger water capacity in FRP filtration system up to 100m3/h
  • Smaller installation footprint
  • Easy and quick disassemble

Conclusion

As the developed demands for high flow filtration, Brother Filtration has designed and manufactured a series of filter products for high flow. Among them, Max Flow FRP housing is preferred by many industries with large water capacity.

People often relate the powerful equipment with complex structure and design. On the contrary, Brother Filtration FRP housing is easy and simple to install and operate and doesn’t need too many tools.

If you still have any questions about how to install the Max Flow FRP Housing, please feel free to contact us, our professional team will help you solve the problem.

ご質問がありますか?

お問い合わせ

error: Content is protected !!